Plastic Shredding Machinery: Steps Involved In Plastic Shredding

Views: 517 Author: Site Editor Publish Time: 2020-10-09 Origin: Site

Plastic shredders are used for big plastic waste such as pipes, drums, and car bumpers which are too big for granulators. It is a machine used in cutting plastic into pieces for granulation.


Also, the waste like car bumpers, drums, pipes, and other items are put into the plastic shredder and it moves at a slow speed and breaks the plastics down with the use of its blade into smaller chunks.


In the plastic shredding process, plastic waste is first collected and separated before they are shredded.


Most importantly, for a seamless plastic shredding into the right sizes, purchasing a plastic shredding machinery from experienced and renowned suppliers is the most recommended option.


Below are some important steps involved in plastic shredding using the plastic shredding machinery.

 Plastic pipe lumps shredder


Steps Involved in Plastic Shredding

Steps required in shredding your plastic are of different stages and this includes the following;


1. Cleaning of your plastic waste

This first step required after you must have sorted your waste plastic and separated it is to thoroughly clean your plastics.


This is an important aspect of the plastic shredding machinery process. When you clean you must remove all the dust, tags, and stickers, etc.


2. Store the plastic items

The next step after the cleaning is to store the plastic items in a clean place.  When you keep your plastic in a clean place, it won't be dusty and will not be affected by moisture.


3. Don’t mix plastics

During the process of plastic shredding, it is not required to shred separate items in a session.


At the time of extrusion, each item reacts in different ways to heat which may cause irregularity in the filament.


For this reason, it is advisable to shred material or items separately to prevent contamination and blockage in the extruder.


4. Cut and break up the plastic materials

There are many big size material, it is required that you break the plastic into smaller sizes before you feed into your shredder, this will help you to avoid overloading which can cause your shredder to malfunction or develop faults.


5. Feed the hopper

The next step required is to feed the hopper; this is done after you must have broken your plastic materials.


Don’t feed the hopper with all the plastics materials at once, do it batch by batch to avoid overloading the hopper during the plastic shredding process


6. Check your regrinds

After you must have ground your material, it is necessary to check through to see if there are no large parts that did not break. And it is advised you re-shred your grinds to ascertain proper grinds.  


7. Store your regrinds

Your need to store your grind properly, just like the way you stored your plastic material after cleaning. It should be stored in a dust-free container and no liquid must touch it.


Do you need a reliable Plastic Shredding Machine?

If you need a professional and highly experienced plastic shredding machine supplier for all your plastic shredding machinery, kindly click here to speak with us about your needs.  


We look forward to giving you the best equipment at the best price. Yes, we keep to our words!


Contact Us